UHF TELEPHONE TRANSMITTER

TKS-103 UHF 2 CIRCUIT DIVISION TELEPHONE TRANSMITTER

 

 

 
Dimension 37*28*25mm
Weight 10g
Frequency A channel 398.605 Mhz, B channel 399.455Mhz, C channel 399.030Mhz
Distance 200 meters
Power source No battery needed
Receiver TKS-151 UHF 3-CHANNEL MINI RECEIVER
Transmitter built in 2 circuit division socket.(It sends electric wave only at the time of telephone use)
Instruction:
TKS-103 is a two mouth modular jack adapter installed in transmitter.
It can connect at any point between telephone set and wall modular consent.
Directions:
• The lock of the root is removed, the telephone wire inserted in the rosette by the wall is drawn out, and TKS-103 are inserted in the receiving window of a rosette. The removed telephone wire is inserted in any of TKS-103, or one receiving window. After attaching, it checks whether telephone surely operates. It can check by the ability of the sound which takes the receiver of telephone to it and is called "tsuu" to be heard. Even when two telephones are connected simultaneously, even if it uses which  telephone, a transmitter operates.
• Since there are three kinds of channels when hearing it with a receiver, it is not audible unless the channel is correct. The attainment distance of an electric wave is 30 or about 150m. It changes according to the situation of the place to install and the place to receive. In a building, distance becomes short.
• An exclusive receiver (TKS-151) is used for receiving. Commercial UHF band Although a multi-channel receiver can also be used, tone quality is bad or receiving distance becomes short.
• When you make it automatic recording, please be sure to carry out a check of operation. It changes into the state where the weather report etc. is heard, there is no noise in a receiver, and it checks whether it is finely audible. After that, a receiver and a recorder are connected in recording code of receiver attachment, and the recording button of a sound starting system is pushed. Subsequently, it checks whether a  telephone is hung up and the recording of a recorder has stopped. If the newest IC recorder is used, a part for 10 hours  can be recorded continuously, and moreover, it can take in and save in a personal computer, and can also be reproduced and heard with a personal computer.
Notes
• This device cannot be used for a business phone. Although an obstacle is not generated at all in a circuit, when you use, please use on the responsibility of yourself. Be careful enough not to become infringement of privacy.
• Please do not attach a magnet in a main part. An electric wave does not become weak or it stops coming out.