| |

|
Product Description:
Specification:
1. Dimension :14*20*65mm
2. Weight :53g (a lithium battery is included)
3. The scramble transmitter for voice hearing of a career change
system
4. Four kinds of careers are changed one by one by 50mS.
5. Career frequency 398.605MHz, 399.030MHz, 399.455MHz,
399.885MHz
6. Power supply voltage 3V
7. Consumption current 11mA
8. High frequency output 5mW.
9. Used battery CR-12600SE (lithium) or two dry cells of U5
Summary:
.With a commercial any receiver, it cannot be heard except an
exclusive receiver(TKS-151.A).
.It becomes the system which changes four kinds of careers
(dispatch frequency) for a short time (it is 5 times in 1 second).
It restores to a receiver on a career in the form which carries out
an automatic tailing synchronization.
.It cannot be heard that it is not the receiver which became the
pair by the difference in the order of a repetition of a carrier
(being all six kinds).
.The notification distance of an electric wave is about 200m at a
flat background.
.Continuation trial is carried out, and there is a battery life for five
days (when lithium battery CR-12600SE are used). Dry cell of
U5 can also be used
.The model of special frequency can also be manufactured.
(Being a 400MHz + - less than 5MHz transmission-and-
reception set 40% increase price. Time-for-delivery one month)
Directions
.It slides and removes, pressing down the back lid of a main part
with the thumb, polarity is put in for a battery to prevent
mistakes, and a lid is shut. If an attached antenna is
attached,
finally preparation is. Dispatch will be begun if the slide
switch
in an antenna side is put into the direction of red mark.
.The rest is only established in a required place.
. It warns against plugging up the hole in which the sound of a
microphone is brought together.
. Electric wave efficiency becomes [ the direction where the
attached antenna used 1/4 wave of straight-wire antenna from
the helical antenna ] good about ten percent.
Notes:
.Since the condensation internal organs of the precision parts
are carried out, please do not carry out usage which gives a
shock. Since the attachment portion of an antenna tends to
break, be careful of handling enough.
.Please do not attach a powerful magnet to a main part. It stops
functioning at an instant like a magnetic card. It does not
return, unless it readjusts. |