|
Specification：
．Sensor:1/4” color CMOS Sensor
．Lens:Cone Lens f3.7 mm/F2.0
．Effective Picture Elements: VGA (H: 640 x V: 480)
．S/N Ration:46 dB
．Electronic Shutter: Auto
．Gain Control: Auto
．Auto White Balance: RCA(1 Vp-p./75ohms)
．Synchronous System: NTSC/PAL (adjustable)
．Video output port: VGA(640*480)/ QVGA(320*240)
．Video output format: High/Medium/Low
．Recording Mode: Manual/Continuous/Motion Detection
．Recording Resolution: 320*240:1~30FPS, 640*480:1~12FPS
．Storage Capacity: Built-in 128MB Flash Memory
(capacity differs depending on model type)
．Memory Full: Stop/Overwrite (selectable)
．Playback Mode: Forward/Rewind: x1 / x2/ x4/ x8/ x16x32,Pause and Step
．Search Playback: Date & Time
．Motion Detection: Full Screen/ Adjustable Detect sensitivity
rate
．On Screen Display: Mode/ Date/Time/ Status
．Power Supply: DC 12V ±%10 /180mA or 4 AA Batteries
．Adaptor:110V AC/ 12V DC (2-Pin plug) or 230V AC/ 12V DC
(2-pin plug)
．Battery Life NiMH 2100mA: Continuous Application: 4hours and 45 minutes
|
Record Time
|
Quality |
30fps@320╳240 |
12 fps@640╳480 |
|
Low |
550minutes |
400 minutes |
|
Medium |
270 minutes |
240 minutes |
|
High |
220 minutes |
125 minutes |
Feature:
1. The device is extremely portable with built-in Hi-resolution camera.
2. Automatic image control functions.
3. Function Supported: Auto Electronic Shutter (AES), Auto White Balance
(AWB) and Auto Gain Control (AGC).
4. Simultaneous monitoring and recording.
5. Two types of resolution (selectable): 320*240 and 640*480.
6. Two recording mode, Supported continuous and motion detection
recording.
7. Supports both PAL and NTSC system.
8. Live video guardable while under recording process.
9. Supports three recording modes: Manual, Schedule Continuous, and
Schedule Motion Detection.
10. Selectable compression image qualities and frame rates.
11. Motion detection with Adjustable motion sensitivity level.
12. Supports flexible playback mode: Normal Playback, Fast Forward,
Rewind, and Step Playback.
13.Video capture
device record images in built-in Flash memory (capacity differs depending
model type).
14. Video capture
device record images in built-in Flash memory (capacity differs depending
on model type). Recording auto resumes after power loss and back.
15. Supports
DC12V or 4*AA batteries (use anywhere, camera can be power by battery, so
power outlet is unnecessary).
Function:
(1)Function Switch:
NTSC <->PAL
The two most common video standards used are NTSC and PAL.
NTSC is the video system or standard used in North America and of South
America.
PAL is the predominant video system or standard mostly used in Europe.
Please select and switch to the best suits your location.
Full Stop <->Overwrite
Select whether to overwrite the recorded memories or to stop recording
when memory is full. One may select “Overwrite”, the memory will be
overwritten starting with the oldest data first.
Selecting “Full stop” , when the memory system is full, it
switches from recode mode to stop mode, and the LED indicator on the front
panel will start flashing. Take note that this setup is only effective
when it is setup before power-on.
(2)Video Output Jack:
To enable monitoring functions, connect one terminal to the video out
jack and the other terminal to the monitor (TV).
(3)Power Switch
Select “On” to switch on the device, and “Off” to switch
off the device.
(4)Power Source Jack
(5)LED operation Mode Indicators
LED light easily allows the user to distinguish the current system
status. For example REC LED: when the LED lights up, indicates
recording and LED lights off indicates on recording.
(6)Button
Buttons commonly used: Rec ■/●.
But all other 5 buttons are applied during
setups. Every button under each mode has different definition. For more
details , please refer to the section on “Function Setup Description”.
(7)LED Power Indicator
The LED indicator lit indicates that the device is powered up and when
unlit indicates that the power is insufficient or switched off.
|
